Industrial PCs
MIPC-XL / MIPC-XLT



Move mouse across to get an insight view

 

The XL or XLT (Touch Screen) Series

Specifically designed for a large stamping press manufacturer, this PC had to combine floating suspension for shock, special heat dissipation and monitoring and front access for rapid exchange of all parts and boards.    


1 of the 4 shock absorber for the housing

 

Metal wire shock absorbers float the housing and the hard drive is additionally  protected with rubber shock absorbers
Five fans are temperature controlled and speed monitored.  If one fan does not work properly, a red LED on the front panel indicates fan failure.  Further, the slot CPU is temperature monitored with another red LED on the front panel. This warns of potential heat failure before it occurs. 
Service and short downtime considerations did not end with the front door access. Power supply, hard drive, floppy, CD-Rom, etc. have quick mounting frames or supports and sufficient access space. For instance the two screen back lights or display are exchanged in less than one minute - not hours.   

A separate front door gives access and covers CD-ROM, floppy, mouse and keyboard.  

This combination makes the PC suitable for your toughest application !!

Typically use:

  • All applications with major shocks and vibration.

  • Hot environments

  • Downtime-critical machinery

 

 

Technical Data

 

Slot-CPU*:

AMD K2/6 300MHZ or Pentium 233 MMX

RAM*:

128 MB

Display:

15.1” (1024 x 768) color active matrix TFT LCD flat panel

Slots ISA/PCI*:

4 PCI, 8 ISA 2 combination ISA & PCI

Drives:

2.5” IBM Hard Drive, Floppy-Disk, CD-ROM

Interfaces:

Serial & SCSI (front access), Parallel

Ethernet:

3 Com Ethernet controller card 10/100 RJ-45 and AUI

Fans (Housing):

4 long life fans, temperature controlled and speed monitoring

CPU Fan:

1 long life fan, speed monitoring

Power Supply:

24V DC, 80-240 VAC

Power Consumption:

240 Watt

Operating System:

Win NT 4.0, (Dos 6.22, Win 3.11, Win9x, Win2000)

Touch screen (only XLT):

Analog resistive

Mouse (only XL):

Finger mouse

 

 

Environment

 

EMC:

EN 61000-4-2 (IEC-801-2) / EN 61000-4-4 (IEC-801-4)

Operating Temperature:

32 – 131°F (0-55° C)

Storage Temperature:

-4°F – 176°F (-20 – 80°C)

Humidity:

98% (No condensation)

Front Door:

NEMA 12 (IP65) closed Front Door

Standards:

CE

 

 

Dimension

 

Width:

19”

Height:

15.7”

Deep:

7.2”

 

 

Shock / Vibration

 

Vibration (50 to 2000 Hz)

£  1 g

Shock (11ms) IEC 68-2-27

£  10 g

* Check for the latest update

back | MIPC-C / -CT | MIPC-H / -Q | Rack PCs | ShoeBox PCs | Displays | Home

Copyright © 2000 TRS Fieldbus Systems, Inc. All rights reserved.
Revised: August 30, 2000 .