I

I/O-Modules
Fieldbus Terminals
Relay Output Terminal 400 V AC, 3 A

Product Description

The KL2631 output terminal switches a relay with one single contact, controlled by the
control system. The relay contact is connected to the power contacts, which can be used up
to 400 V AC, and can be used universally to switch mains voltage loads. The bus terminal
indicates its signal status by a LED. The KL2631 bus terminal must be supplied via the
feed-in terminal KL9190 for use of high voltage up to 400 V AC.

Technical data	KL2631
Number of outputs	1 x normally-open to power contact
Rated load voltage	400 V AC / 300 V DC
Switching capacity DC	300 V = 0.15 A; 24 V = 5 A; non lineaer
Switching capacity AC	power contact
Switching voltage minimum	(short-circuit-protected)
Electrical isolation	500 Vrms (K-Bus / field voltage)
Current consumption from K-Bus	80 mA
Operating cycles mech. (min.)	10⁷
Operating cycles electr. (min.)	1,3 x 10⁵ (2 A / 250 V AC)
Bit width in the process image	2 O
Configuration	no address settings, configurations via bus coupler or control system
Weight approx.	85 g
Operating temperature	0°C ... +55°C
Storage temperature	-25°C ... +85°C
Relative humidity	95%, no condensation
Vibrations/Shock resistance	conforms to IEC 68-2-6 / IEC 68-2-27
EMC resistance burst / ESD	conforms to EN 50082 (ESD, Burst) / EN 50081
Installation position	any
Type of protection	IP20

back | Fieldbus Terminals | Download | Home