I/O-Modules
Fox Series
MAO-4, Analog Output
Sub module
The MAO-4 output module is a submodule, which is galvanically decoupled by means of optocouplers, for the CNX21 base module. The submodule provides four digital outputs. For operation in the II/O system, you can install up to four MAO-4s in the four slots of a CNX21 base module. This makes possible a maximum of 16 outputs per CNX21. In addition, you can combine MAO-4s with different modules, e.g. digital outputs.
The four channels have a 16-bit resolution.
|
Technical data |
MAO-4 |
|
Outputs |
4 Analog outputs, galvanically decoupled |
|
Output Levels |
-10V.. +10V , Imax = 10 mA |
|
Decoupling |
Submodule is galvanically separated by optocoupler to the base module |
|
Resolution |
16 bit ( 1 digit = 305 µV ) |
|
Supply Voltage |
24 VDC (± 20%) |
| Current Consumption | 0.05 A (without load and input currents) |
|
Housing |
Module with front panel is mounted in the CNX21 using two screws. |
|
Dimensions (WxHxD) |
58 * 72 * 50 mm |
|
Weight approx. |
100 g |
|
Operating temperature |
0°C ... +55°C |
|
Storage temperature |
-20°C ... +70°C |
Signal Description
|
Pin |
Signal |
I/O |
Description |
| R-1 | AOut1 | Analog output, channel 1 | |
| R-2 |
0 V | Gnd1 | Ground, channel 1 |
| R-3 | AOut2 | Analog output, channel 2 | |
| R-4 |
0 V | Gnd2 | Ground, channel 2 |
| R-5 | AOut3 | Analog output, channel 3 | |
| R-6 | 0 V | Gnd3 | Ground, channel 3 |
| R-7 | AOut4 | Analog output, channel 4 | |
| R-8 |
0 V | Gnd4 | Ground, channel 4 |
| R-9 | Not assigned | ||
| R-10 | Not assigned |
Pin designations: R = right-hand row
back | Fox Series | Download | Home
Copyright © 2000 TRS
Fieldbus Systems, Inc. All rights reserved.
Revised: August 07, 2000
.